Datasheet4U Logo Datasheet4U.com

TS4962 - 2.8W filter-free mono class D audio power amplifier

General Description

The TS4962 is a differential class-D BTL power amplifier.

It can drive up to 2.2 W into a 4 Ω load and 1.4 W into an 8 Ω load at 5 V.

Key Features

  • Operating from VCC = 2.4 V to 5.5 V.
  • Standby mode active low.
  • Output power: 2.8 W into 4 Ω and 1.7 W into 8 Ω with 10% THD+N maximum and 5 V power supply.
  • Output power: 2.2 W at 5 V or 0.7 W at 3.0 V into 4 Ω with 1% THD+N maximum.
  • Output power: 1.4 W at 5 V or 0.5 W at 3.0 V into 8 Ω with 1% THD+N maximum.
  • Adjustable gain via external resistors.
  • Low current consumption 2 mA at 3 V.
  • Efficiency: 88% typical.
  • Signal to noise ratio: 85 dB typical.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TS4956 Stereo audio amplifier system ST Microelectronics
TS4004 Low-noise charge pump DC converter ETC
TS4054 500mA single-cell lithium battery charger Synmosaic
TS408 Classic temperature sensor TIANSOR
TS40P05G Glass Passivated Bridge Rectifiers Taiwan Semiconductor

Other Datasheets by STMicroelectronics

Part Number Description
TS4962M 3W filter-free class D audio power amplifier
TS4900 300mW at 3.3V SUPPLY AUDIO POWER AMPLIFIER
TS4902 300mW at 3.3V SUPPLY AUDIO POWER AMPLIFIER WITH STANDBY MODE ACTIVE LOW
TS4909 Dual mode low power 150 mW stereo headphone amplifier
TS4972 1.2W AUDIO POWER AMPLIFIER WITH STANDBY MODE ACTIVE HIGH

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TS4962 2.8 W filter-free mono class D audio power amplifier Features ■ Operating from VCC = 2.4 V to 5.5 V ■ Standby mode active low ■ Output power: 2.8 W into 4 Ω and 1.7 W into 8 Ω with 10% THD+N maximum and 5 V power supply ■ Output power: 2.2 W at 5 V or 0.7 W at 3.0 V into 4 Ω with 1% THD+N maximum ■ Output power: 1.4 W at 5 V or 0.5 W at 3.