Datasheet4U Logo Datasheet4U.com

TSX3704 - Micropower quad CMOS voltage comparators

General Description

The TSX3704 is a micropower CMOS quad voltage comparator which exhibits a very low current consumption of 5 µA typical per comparator.

This device was designed as the improvement of the TS3704: it shows a lower current consumption, a better input offset voltage, and an enhanced ESD tolerance.

Key Features

  • Low supply current: 5 µA typ. per comparator Wide single supply range 2.7 V to 16 V or dual supplies (±1.35 V to ±8 V) Extremely low input bias current: 1 pA typ. Input common-mode voltage range includes ground Push-pull output High input impedance: 1012 Ω typ Fast response time: 2.7 µs typ. for 5 mV overdrive ESD tolerance: 4 kV HBM, 200 V MM Related products Pin-to-pin and functionally compatible with the dual CMOS TS3704 comparators See TSX339 for open drain output.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TSX3710 CABLE ASSEMBLY INSTRUCTION ETC
TSX-1001 Mixed-Signal Microcontroller Triad Semiconductor
TSX-3225 Ceramic Seam Weld ETC
TSX-3225 MHz RANGE CRYSTAL UNIT Epson
TSX-4025 CERAMIC SEAM WELD ETC

Other Datasheets by STMicroelectronics

Part Number Description
TSX3702 Micropower dual CMOS voltage comparators
TSX339 Micropower dual CMOS voltage comparators
TSX393 Micropower dual CMOS voltage comparators
TSX561 16V CMOS operational amplifiers
TSX561A 16V CMOS operational amplifiers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TSX3704 Micropower quad CMOS voltage comparators Datasheet - production data Features Low supply current: 5 µA typ. per comparator Wide single supply range 2.7 V to 16 V or dual supplies (±1.35 V to ±8 V) Extremely low input bias current: 1 pA typ. Input common-mode voltage range includes ground Push-pull output High input impedance: 1012 Ω typ Fast response time: 2.7 µs typ. for 5 mV overdrive ESD tolerance: 4 kV HBM, 200 V MM Related products Pin-to-pin and functionally compatible with the dual CMOS TS3704 comparators See TSX339 for open drain output Applications Automotive Industrial Description The TSX3704 is a micropower CMOS quad voltage comparator which exhibits a very low current consumption of 5 µA typical per comparator.