Datasheet4U Logo Datasheet4U.com

TSX393 - Micropower dual CMOS voltage comparators

General Description

The TSX393 is a micropower CMOS dual voltage comparator which exhibits a very low current consumption of 5 µA typical per comparator.

This device was designed as the improvement of the TS393: it shows a lower current consumption, a better input offset voltage, and an enhanced ESD tolerance.

Key Features

  • Low supply current: 5 µA typ. per comparator.
  • Wide single supply range 2.7 V to 16 V or dual supplies (±1.35 V to ±8 V).
  • Extremely low input bias current: 1 pA typ.
  • Input common-mode voltage range includes ground.
  • Open drain output.
  • High input impedance: 1012 Ω typ.
  • Fast response time: 2 µs typ. for 5 mV overdrive.
  • ESD tolerance: 4 kV HBM, 200 V MM.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TSX3710 CABLE ASSEMBLY INSTRUCTION ETC
TSX-1001 Mixed-Signal Microcontroller Triad Semiconductor
TSX-3225 Ceramic Seam Weld ETC
TSX-3225 MHz RANGE CRYSTAL UNIT Epson
TSX-4025 CERAMIC SEAM WELD ETC

Other Datasheets by STMicroelectronics

Part Number Description
TSX339 Micropower dual CMOS voltage comparators
TSX3702 Micropower dual CMOS voltage comparators
TSX3704 Micropower quad CMOS voltage comparators
TSX561 16V CMOS operational amplifiers
TSX561A 16V CMOS operational amplifiers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TSX393 Datasheet Micropower dual CMOS voltage comparators D SO8 (plastic micropackage) P TSSOP8 (thin shrink small outline package) S MiniSO8 (plastic package) DFN8 2x2 mm (plastic micropackage) Maturity status link TSX393 Features • Low supply current: 5 µA typ. per comparator • Wide single supply range 2.7 V to 16 V or dual supplies (±1.35 V to ±8 V) • Extremely low input bias current: 1 pA typ. • Input common-mode voltage range includes ground • Open drain output • High input impedance: 1012 Ω typ. • Fast response time: 2 µs typ. for 5 mV overdrive • ESD tolerance: 4 kV HBM, 200 V MM Applications • Automotive • Industrial Description The TSX393 is a micropower CMOS dual voltage comparator which exhibits a very low current consumption of 5 µA typical per comparator.