Datasheet4U Logo Datasheet4U.com

VIPER26K Datasheet 1050v High Voltage Converter

Manufacturer: STMicroelectronics

Overview: VIPER26K 1050 V high voltage converter for ultra-wide input.

General Description

The device is a high voltage converter smartly integrating a 1050 V avalanche-rugged power section, with a PWM current mode control.

The 1050 V-BV power MOSFET allows to extend input voltage range, and reduce the size of the DRAIN snubber circuit.

This IC meets the most stringent energy-saving standards as it has very low consumption and operates in burst mode under light load.

Key Features

  • 1050 V avalanche-rugged power MOSFET.
  • allowing ultra-wide VAC input range to be covered.
  • Embedded HV startup and sense-FET.
  • Current mode PWM controller.
  • Drain current limit protection:.
  • -500 mA (VIPER265K).
  • -700 mA (VIPER267K).
  • Jittered switching frequency reduces the EMI filter cost: 60 kHz ± 4kHz.
  • Standby power < 30 mW at 230 VAC.
  • Embedded E/A with 3.3 V reference.
  • Safe auto-restart after a fault condition.
  • Hysteretic thermal shutdow.

More Datasheets from STMicroelectronics

Part Number Description
VIPER26 Fixed frequency VIPer
VIPER20 SMPS PRIMARY I.C.
VIPer20A SMPS PRIMARY I.C.
VIPer20ADIP SMPS PRIMARY I.C.
VIPer20ASP SMPS PRIMARY I.C.
VIPER20B SMPS PRIMARY I.C.
VIPer20BSP SMPS PRIMARY I.C.
VIPer20DIP SMPS PRIMARY I.C.
VIPer20SP SMPS PRIMARY I.C.
VIPER222 High voltage converter

VIPER26K Distributor