STMicroelectronics VN340SP-33-E
VN340SP-33-E are monolithic devices developed using STMicroelectronics' VIPower technology, intended to drive four independent resistive or inductive loads with one side connected to ground. The open drain diagnostic output indicates overtemperature conditions.| Part No. | VN340SP-33-E |
|---|---|
| Datasheet | VN340SP-33-E Download |
| Manufacturer |  STMicroelectronics |
| Description | Quad high side smart power solid state relay |
| Buy | Stock & Price |
FEATURES
● Operating output current: 0.7 A (VN340SP-E) or 1 A (VN340SP-33-E)● Digital I/O clamped at 32 V minimum voltage
● Shorted load and overtemperature protections
● Protection against loss of ground
● Built-in current limiter
● Undervoltage shutdown
● Open drain diagnostic output
● Fast demagnetization of inductive loads
● Conforms to IEC 61131-2
APPLICATIONS
● Vending machines● Industrial PC peripheral input/output
● Numerical control machines
● General high-side switch applications
DESCRIPTION
VN340SP-E & Active current limitation prevents dropping of the system power supply in case of shorted load. Built-in thermal shutdown protects the chip from overtemperature and short-circuit. Each I/O is pulled down when the overtemperature condition of the relative channel is verified. DS4346 - Rev 5 - September 2022 For further information contact your local STMicroelectronics sales office. 1 Block diagram VN340SP-E & VN340SP-33-E Block diagram Figure 1. Block diagram DS4346 - Rev 5 page 2/20 VN340SP-E & VN340SP-33-E Pin connection 2 Pin connection Figure 2.
