STMicroelectronics VN5E160S-E
The VN5E160S-E is a single channel high-side driver manufactured in the ST proprietary VIPower M0-5 technology and housed in the tiny SO-8 package. The VN5E160S-E is designed to drive automotive grounded loads delivering protection, diagnostics and easy 3V and 5V CMOS-compatible interface with any microcontroller. The device integrates advanced protective functions such as load current limitation, inrush and overload active management by power limitation, over-temperature shut-off with autorestart and over-voltage active clamp.VN5E160S-E Specifications
- Package : SOP
- Mount Type : Surface Mount
- Operating Voltage : 13V
- Min Voltage : 4.5V
- Max Voltage : 28V
- Outputs : 1
- Output Current : 10A
- Max Output Current : 1A
- Terminals : 8
- Output Current/Channel : 7A
- Max Operating Temp : 150°C
- Min Operating Temp : -40°C
- Max Supply Current : 3.5mA
Source:
Octopart
FEATURES
Max transient supply voltage Operating voltage range Max On-state resistance (per ch.) Current limitation (typ) Off state supply current 1. Typical value with all loads connected.● VCC 41V VCC 4.5 to 28V RON ILIMH IS 160 mΩ 10A 2 µA(1) SO-8 Application
● General – Inrush current active management by power limitation – Very low stand-by current – 3.0V CMOS compatible inputs – Optimized electromagnetic emissions – Very low electromagnetic susceptibility – In compliance with the 2002/95/EC european directive Diagnostic functions – Open Drain status output – On-state open load detection – Off-state open load detection – Output short to VCC detection – Overload and short to ground (power limitation) indication – Thermal shutdown indication Protections – Undervoltage shutdown – Overvoltage clamp – Load current limitation – Self limiting of fast thermal transients – Protection against loss of ground and loss of VCC – Over-temperature shutdown with autorestart (thermal shutdown) – Re...