STMicroelectronics VN610SP
The VN610SP is a monolithic device made using STMicroelectronics VIPower M0-3 technology. It is intended for driving resistive or inductive loads with one side connected to ground. This device integrates an analog current sense which delivers a current proportional to the load current (according to a known ratio).| Part No. | VN610SP |
|---|---|
| Datasheet | VN610SP Download |
| Manufacturer |  STMicroelectronics |
| Description | SINGLE CHANNEL HIGH SIDE SOLID STATE RELAY |
| Buy | Stock & Price |
FEATURES
Type RDS(on) IOUT VCC VN610SP 10mΩ(1) 45A(1) 36V t(s) 1. Per each channel. duc● Output current: 45A ro
● CMOS compatible inputs P
● Proportional load current sense te
● Under-voltage and over-voltage shutdown ole
● Over-voltage clamp s
● Thermal shutdown Ob
● Current limitation -
● Very low standby power consumption t(s)
● Protection against loss of ground and loss of VCC Obsolete Produc
● Reverse battery protected 10 1 PowerSO-10
DESCRIPTION
Active VCC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table). Active current limitation combined with thermal shutdown and automatic restart protect the device against over-load. Device automatically turns off in case of ground pin disconnection. Table 1. Device summary Package PowerSO-10 Tube VN610SP Order codes Tape and reel VN610SP13TR September 2013 Doc ID 6236 Rev 5 1/26 1 Contents Contents VN610SP 1 Block diagram and pin description . . . . . . . . . . . . . . . . . . . . . . . . . . . .
