STMicroelectronics VN7140AJ
The devices are single channel high-side drivers manufactured using ST proprietary VIPower M0-7 technology and housed in PowerSSO-16 and SO-8 packages. The devices integrate advanced protective functions such as load current limitation, overload active management by power limitation and overtemperature shutdown with configurable latch-off.- Min Voltage : 4V
- Max Voltage : 28V
- Channels : 1
- Max Operating Temp : 150°C
- Min Operating Temp : -40°C
Source:
Octopart
| Part No. | VN7140AJ |
|---|---|
| Datasheet | VN7140AJ Download |
| Manufacturer |  STMicroelectronics |
| Description | High-side driver |
| Buy | Stock & Price |
FEATURES
Max transient supply voltage Operating voltage range Typ. on-state resistance (per Ch) Current limitation (typ) Standby current (max) VCC VCC RON ILIMH ISTBY 40 V 4 to 28 V 140 mΩ 12 A 0.5 µA● AEC-Q100 qualified
● General – Single channel smart high-side driver with MultiSense analog feedback – Very low standby current – Compatible with 3 V and 5 V CMOS outputs
● MultiSense diagnostic functions – Multiplexed analog feedback of: load current with high precision proportional current mirror, VCC supply voltage and TCHIP device temperature – Overload and short to ground (power limitation) indication – Thermal shutdown indication – OFF-state open-load detection – Output short to VCC detection – Sense enable/disable
● Protections – Undervoltage shutdown – Overvoltage clamp – Load current limitation – Self limiting of fast thermal transients – Configurable latch-off on overtemperature or power limitation with dedicated fault reset pin – Loss of ground and loss of VCC – Reverse batte...
