STMicroelectronics VN9D5D20F
The VN9D5D20F is a device made using STMicroelectronics VIPower technology. It is intended for driving resistive or inductive loads directly connected to the ground. The device is protected against voltage transient on VCC pin.- Min Voltage : 4V
- Max Voltage : 28V
- Channels : 4
- Max Operating Temp : 150°C
- Min Operating Temp : -40°C
Source:
Octopart
| Part No. | VN9D5D20F |
|---|---|
| Datasheet | VN9D5D20F Download |
| Manufacturer |  STMicroelectronics |
| Description | 4-channel high-side driver |
| Buy | Stock & Price |
FEATURES
Channel 0, 1 2, 3 VCC 28 V RON typ. 6.7 mΩ 20 mΩ ILIMH typ. 72 A 34.5 A● AEC-Q100 qualified
● General – Extreme low voltage operation for deep cold cranking applications (compliant with LV124, revision 2013) – 24-bit ST-SPI for full diagnostic and digital current sense feedback – Integrated 10-bit ADC for digital current sense – Integrated PWM engine with independent phase shift and frequency generation (for each channel) – Programmable Bulb/LED mode for all channels – Advanced limp-home functions for robust fail-safe system – Very low standby current – Optimized electromagnetic emissions – Very low electromagnetic susceptibility – Control through direct inputs and/or SPI – Compliant with European directive 2002/95/EC
● Diagnostic functions – Digital proportional load current sense – Synchronous diagnostic of over load and short to GND, output shorted to VCC and OFF-state open-load – Programmable case overtemperature warning
● Protection – Load current limitation – Self limit...
