STMicroelectronics VND5004A-E
The VND5004A-E and VND5004ASP30-E are devices made using STMicroelectronics VIPower technology. They are intended for driving resistive or inductive loads with one side connected to ground. These devices integrate an analog current sense which delivers a current proportional to the load current (according to a known ratio) when CS_DIS is driven low or left open.| Part No. | VND5004A-E |
|---|---|
| Datasheet | VND5004A-E Download |
| Manufacturer |  STMicroelectronics |
| Description | high-side driver |
| Buy | Stock & Price |
FEATURES
APPLICATIONS
● All types of resistive, inductive and capacitive loads Max transient supply voltage VCC 41V● Suitable for power management applications Operating voltage range VCC Max on-state resistance (per ch.) RON Current limitation (typ) ILIMH Off state supply current IS 1. Typical value with all loads connected 4.5 to 27V 4m 100A 2A(1)
● AEC-Q100 qualified
● General – Inrush current active management by power limitation – Very low stand-by current – 3.0 V CMOS compatible input – Optimized electromagnetic emission – Very low electromagnetic susceptibility – In compliance with the 2002/95/EC European directive
● Diagnostic functions – Proportional load current sense – Current sense disable – Thermal shutdown indication
DESCRIPTION
Active VCC pin voltage clamp and load dump protection circuit protect the devices against transients on the Vcc pin. When CS_DIS is driven high, the CURRENT SENSE pin is high impedance. Output current limitation protects the devices in overload condition.
