STMicroelectronics VND7040AJ
The device is a double channel high-side driver manufactured using ST proprietary VIPower® M07 technology and housed in PowerSSO-16 package. The device is designed to drive 12 V automotive grounded loads through a 3 V and 5 V CMOS-compatible interface, providing protection and diagnostics.- Min Voltage : 4V
- Max Voltage : 28V
- Max Operating Temp : 125°C
- Min Operating Temp : -40°C
Source:
Octopart
| Part No. | VND7040AJ |
|---|---|
| Datasheet | VND7040AJ Download |
| Manufacturer |  STMicroelectronics |
| Description | Double channel high-side driver |
| Buy | Stock & Price |
FEATURES
Max transient supply voltage Operating voltage range Typ. on-state resistance (per Ch) Current limitation (typ) Standby current (max) VCC VCC RON ILIMH ISTBY 40 V 4 to 28 V 40 mΩ 34 A 0.5 µA● AEC-Q100 qualified
● General − Double channel smart high-side driver with MultiSense analog feedback − Very low standby current − Compatible with 3 V and 5 V CMOS outputs
● MultiSense diagnostic functions − Multiplexed analog feedback of: load current with high precision proportional current mirror, VCC supply voltage and TCHIP device temperature − Overload and short to ground (power limitation) indication − Thermal shutdown indication − OFF-state open-load detection − Output short to VCC detection − Sense enable/disable
● Protections − Undervoltage shutdown − Overvoltage clamp − Load current limitation − Self limiting of fast thermal transients − Configurable latch-off on overtemperature or power limitation with dedicated fault reset pin − Loss of ground and loss of VCC − Reverse batter...
