STMicroelectronics VND810PEP-E
The VND810PEP-E is a monolithic device designed in STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. The device detects open load condition both in on and off state.| Part No. | VND810PEP-E |
|---|---|
| Datasheet | VND810PEP-E Download |
| Manufacturer |  STMicroelectronics |
| Description | DOUBLE CHANNEL HIGH SIDE DRIVER |
| Buy | Stock & Price |
GENERAL FEATURES
TYPE VND810PEP-E (*) Per each channel Figure 1. Package IOUT 3.5 A (*) VCC 36 V RDS(on) 160 mΩ (*) CMOS COMPATIBLE INPUTS OPEN DRAIN STATUS OUTPUTS● ON STATE OPEN LOAD DETECTION
● OFF STATE OPEN LOAD DETECTION
● SHORTED LOAD PROTECTION
● UNDERVOLTAGE AND OVERVOLTAGE SHUTDOWN
● PROTECTION AGAINST LOSS OF GROUND
● VERY LOW STAND-BY CURRENT
● REVERSE BATTERY PROTECTION (**)
● IN COMPLIANCE WITH THE 2002/95/EC EUROPEAN DIRECTIVE
●
● PowerSSO-12
DESCRIPTION
Active V CC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table). Active current limitation combined with thermal shutdown and automatic restart protects the device against overload. Output shorted to VCC is detected in the off state. Device automatically turns off in case of ground pin disconnection. Table 2. Order Codes Package PowerSSO-12 Note: (**) See application schematic at page 9 Tube VND810PEP-E Tape and Reel VND810PEPTR-E Rev. 4 November 2004 1/15 This is preliminary information on a new product foreseen to be developed.
