STMicroelectronics VND830-E
The VND830-E is a monolithic device made by using STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. The device detects open load condition both is on and off state.| Part No. | VND830-E |
|---|---|
| Datasheet | VND830-E Download |
| Manufacturer |  STMicroelectronics |
| Description | DOUBLE CHANNEL HIGH SIDE DRIVER |
| Buy | Stock & Price |
GENERAL FEATURES
Type VND830-E (*) Per each channel Figure 1. Package Iout 6A (*) VCC 36V RDS(on) 60mΩ (*) CMOS COMPATIBLE INPUTS OPEN DRAIN STATUS OUTPUTS● ON STATE OPEN LOAD DETECTION
● OFF STATE OPEN LOAD DETECTION
● SHORTED LOAD PROTECTION
● UNDERVOLTAGE AND OVERVOLTAGE SHUTDOWN
● LOSS OF GROUND PROTECTION
● VERY LOW STAND-BY CURRENT
●
● SO-16L REVERSE BATTERY PROTECTION (**)
● IN COMPLIANCE WITH THE 2002/95/EC EUROPEAN DIRECTIVE
●
DESCRIPTION
Active V CC pin voltage clamp protects the devices against low energy spikes (see ISO7637 transient compatibility table). Active current limitation combined with thermal shutdown and automatic restart protects the device against overload. Output shorted to VCC is detected in the off state. Device automatically turns off in case of ground pin disconnection. Table 2. Order Codes Package Tube VND830-E Tape and Reel VND830TR-E SO-16L Note: (*) See application schematic at page 9 Rev. 3 February 2005 1/20 VND830-E Figure 2. Block Diagram VCC VCC CLAMP OVERVOLTAGE UNDERVOLTAGE GND INPUT1 STATUS1 CLAMP 1 OUTPUT1 DRIVER 1 CLAMP 2 CURRENT LIMITER 1 LOGIC OVERTEMP.
