STMicroelectronics VND830LSP-E
The VND830LSP-E is a monolithic device made by using STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. The device detects open load condition both in on and off state. The openload threshold is aimed at detecting the 5W/12V standard bulb as an openload fault in the on state.| Part No. | VND830LSP-E |
|---|---|
| Datasheet | VND830LSP-E Download |
| Manufacturer |  STMicroelectronics |
| Description | DOUBLE CHANNEL HIGH SIDE DRIVER |
| Buy | Stock & Price |
GENERAL FEATURES
Type VND830LSP-E RDS(on) 60mΩ (*) Figure 1. Package Iout 18A (*) VCC 36V (*) Per each channel s CMOS COMPATIBLE INPUTS OPEN DRAIN STATUS OUTPUTS s ON STATE OPEN LOAD DETECTION s OFF STATE OPEN LOAD DETECTION s SHORTED LOAD PROTECTION s UNDERVOLTAGE AND OVERVOLTAGE SHUTDOWN s LOSS OF GROUND PROTECTION s VERY LOW STAND-BY CURRENT s 10 1 PowerSO-10 ™ REVERSE BATTERY PROTECTION (**) s IN COMPLIANCE WITH THE 2002/95/EC EUROPEAN DIRECTIVE sDESCRIPTION
Active V CC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table). Active current limitation combined with thermal shutdown and automatic restart protects the device against overload. Device automatically turns off in case of ground pin disconnection. Table 2. Order Codes Package PowerSO-10™ Note: (**) See application schematic at page 9 Tube VND830LSP-E Tape and Reel VND830LSPTR-E Rev. 1 October 2004 1/20 VND830LSP-E Figure 2. Block Diagram VCC VCC CLAMP OVERVOLTAGE UNDERVOLTAGE GND INPUT1 STATUS1 CLAMP 1 OUTPUT1 DRIVER 1 CLAMP 2 CURRENT LIMITER 1 OVERTEMP.
