STMicroelectronics VNQ810-E
The VNQ810-E is a quad HSD formed by assembling two VND810-E chips in the same SO28 package. The VNQ810-E is a monolithic device made by using STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. The device detects open load condition both in on and off state.| Part No. | VNQ810-E |
|---|---|
| Datasheet | VNQ810-E Download |
| Manufacturer |  STMicroelectronics |
| Description | QUAD CHANNEL HIGH SIDE DRIVER |
| Buy | Stock & Price |
GENERAL FEATURES
Type VNQ810-E (*) Per each channel Figure 1. Package Iout 3.5A (*) RDS(on) 160mΩ (*) VCC 36V CMOS COMPATIBLE INPUTS OPEN DRAIN STATUS OUTPUTS s ON STATE OPEN LOAD DETECTION s OFF STATE OPEN LOAD DETECTION s SHORTED LOAD PROTECTION s UNDERVOLTAGE AND OVERVOLTAGE SHUTDOWN s PROTECTION AGAINST LOSS OF GROUND s VERY LOW STAND-BY CURRENT s s SO-28 (DOUBLE ISLAND) REVERSE BATTERY PROTECTION (**) s IN COMPLIANCE WITH THE 2002/95/EC EUROPEAN DIRECTIVE sDESCRIPTION
Active V CC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table). Active current limitation combined with thermal shutdown and automatic restart protects the device against overload. Output shorted to VCC is detected in the off state. Device automatically turns off in case of ground pin disconnection. Table 2. Order Codes Package Tube VNQ810-E Tape and Reel VNQ810TR-E SO-28 Note: (**) See application schematic at page 9 Rev. 1 October 2004 1/20 VNQ810-E Figure 2.
