STMicroelectronics VNQ810M-E
The VNQ810M-E is a quad HSD formed by assembling two VND810M-E chips in the same SO-28 package. The VNQ810M-E is a monolithic device made by using STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. The current limitation threshold is aimed at detecting the 21W/12V standard bulb as an overload fault.| Part No. | VNQ810M-E |
|---|---|
| Datasheet | VNQ810M-E Download |
| Manufacturer |  STMicroelectronics |
| Description | QUAD CHANNEL HIGH SIDE DRIVER |
| Buy | Stock & Price |
GENERAL FEATURES
Type VNQ810M-E (*) Per each channel Figure 1. Package Iout 0.6A (*) RDS(on) 150mΩ (*) VCC 36V CMOS COMPATIBLE INPUTS OPEN DRAIN STATUS OUTPUTS s ON STATE OPEN LOAD DETECTION s OFF STATE OPEN LOAD DETECTION s SHORTED LOAD PROTECTION s UNDERVOLTAGE AND OVERVOLTAGE SHUTDOWN s PROTECTION AGAINST LOSS OF GROUND s VERY LOW STAND-BY CURRENT s s SO-28 (DOUBLE ISLAND) REVERSE BATTERY PROTECTION (**) s IN COMPLIANCE WITH THE 2002/95/EC EUROPEAN DIRECTIVE sDESCRIPTION
Active VCC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table). Active current limitation combined with thermal shutdown and automatic restart protects the device against overload. The device detects open load condition both in on and off state . Output shorted to VCC is detected in the off state. Device automatically turns off in case of ground pin disconnection. Table 2. Order Codes Package Tube VNQ810M-E Tape and Reel VNQ810MTR-E SO-28 Note: (**) See application schematic at page 10 Rev.
