STMicroelectronics VNQ830M-E
The VNQ830M-E is a quad HSD formed by assembling two VND830M-E chips in the same SO-28 package. The VND830M-E is a monolithic device made by using| STMicroelectronics VIPower M0-3 Technology. The VNQ830M-E is intended for driving any type of multiple loads with one side connected to ground.| Part No. | VNQ830M-E |
|---|---|
| Datasheet | VNQ830M-E Download |
| Manufacturer |  STMicroelectronics |
| Description | QUAD CHANNEL HIGH SIDE DRIVER |
| Buy | Stock & Price |
GENERAL FEATURES
Type VNQ830M-E (*) Per each channel Figure 1. Package Iout 6A (*) RDS(on) 60mΩ (*) VCC 36V CMOS COMPATIBLE INPUTS OPEN DRAIN STATUS OUTPUTS s ON STATE OPEN LOAD DETECTION s OFF STATE OPEN LOAD DETECTION s SHORTED LOAD PROTECTION s UNDERVOLTAGE AND OVERVOLTAGE SHUTDOWN s LOSS OF GROUND PROTECTION s VERY LOW STAND-BY CURRENT s s SO-28 (DOUBLE ISLAND) REVERSE BATTERY PROTECTION (**) s IN COMPLIANCE WITH THE 2002/95/EC EUROPEAN DIRECTIVE sDESCRIPTION
Active V CC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table). Active current limitation combined with thermal shutdown and automatic restart protects the device against overload. The device detects open load condition both in on and off state. The openload threshold is aimed at detecting the 5W/12V standard bulb as an openload fault in the on state. Output shorted to VCC is detected in the off state. Device automatically turns off in case of ground pin disconnection Table 2.
