STMicroelectronics VNQ830P-E
The VNQ830P-E is a quad HSD formed by assembling two VND830-E chips in the same SO28 package. The VND830-E is a monolithic device made by using| STMicroelectronics VIPower M0-3 Technology. The VNQ830P-E is intended for driving any type of multiple loads with one side connected to ground.| Part No. | VNQ830P-E |
|---|---|
| Datasheet | VNQ830P-E Download |
| Manufacturer |  STMicroelectronics |
| Description | QUAD CHANNEL HIGH SIDE DRIVER |
| Buy | Stock & Price |
GENERAL FEATURES
TYPE VNQ830P-E (*) Per each channel Figure 1. Package IOUT 6 A (*) VCC 36 V RDS(on) 65 mΩ (*) CMOS COMPATIBLE INPUTS OPEN DRAIN STATUS OUTPUTS s ON STATE OPEN LOAD DETECTION s OFF STATE OPEN LOAD DETECTION s SHORTED LOAD PROTECTION s UNDERVOLTAGE AND OVERVOLTAGE SHUTDOWN s PROTECTION AGAINST LOSS OF GROUND s VERY LOW STAND-BY CURRENT s REVERSE BATTERY PROTECTION (**) s IN COMPLIANCE WITH THE 2002/95/EC EUROPEAN DIRECTIVE s s SO-28 (DOUBLE ISLAND)DESCRIPTION
Active VCC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table). Table 2. Order Codes Package SO-28 Note: (**) See application schematic at page 11. Active current limitation combined with thermal shutdown and automatic restart protects the device against overload. The device detects open load condition both in on and off state. Output shorted to VCC is detected in the off state. Device automatically turns off in case of ground pin disconnection. Tube VNQ830P-E Tape and Reel VNQ830PTR-E Rev.
