MPG06B Datasheet | SUNMATE

Features ! Plastic package has Underwriters Laboratory ! Flammability Classification 94V-0 ! Low forward voltage, high current capability ! Glass passivated chip junction ! High surge capability ! Typical IR less than 0.1µA ! High temperature soldering guaranteed: ! 250°C/10 seconds, 0.375" (9.5mm) lead length, ! 5 lbs. (2.3kg) tension Mechanical Data ! Case:Molded plastic over passivated chip ! Terminals:Plated axial leads, solderable ! per MIL-STD-750,Method 2026 ! Polarity:Color band denotes cathode end ! Mounting Position:Any ! Weight:0.0064 ounce, 0.181 gram MPG06A - MPG06M GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER DIODES Maximum Ratings and Electrical Characteristics TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. MPG MPG MPG MPG MPG SYMBOLS 06A 06B 06D 06G 06J Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=25°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) VRRM 50 100 200 400 600 VRMS 35 70 140 280 420 VDC 50 100 200 400 600 I(AV) 1.0 IFSM 40.0 Maximum instantaneous forward voltage at 1.0A Maximum DC reverse current at rated DC blocking voltage TA=25°C TA=125°C Typical junction capacitance (NOTE 1) Typical reverse recovery time (NOTE 2) Typical thermal resistance (NOTE 3) Operating junction and storage temperature range CJ trr RΘJA RΘJL TJ, TSTG 5.0 50.0 67.0 30.0 -55 to +150 NOTES: (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (2) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (3) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted with 0.22 x 0.22” (5.5 x 5.5mm) copper pads MPG 06K MPG 06M...