Datasheet4U Logo Datasheet4U.com

S1A0501X01 - DIGITAL CONTROLLED AUDIO PROCESSOR

General Description

The S1A0501X01 is an audio processor for volume/tone/fader control, which is suitable for car radios or Hi-Fi system.

It has a built-in trimmer for user to set a source level.

Key Features

  • 3-Input multiplexing Source Level trimmer (selectable input level) Volume control in 0.6dB step Tone control (internal bass/treble function block with external components) Source out / volume in (enable ext. graphic eq. / noise reduction equipment) Loudness / mute Fader control ( separated for balance ) All functions are programmable / controllable via serial I2C bus or general Micom interface protocol.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
S1A050000 Reed Relay Cosmo
S1A050099 Reed Relay Cosmo
S1A050D0 SIP REED RELAY ETC
S1A050X00 SIP REED RELAY ETC
S1A0051 FET Driver Digital & Analog

Other Datasheets by Samsung Semiconductor

Part Number Description
S1A0067X01 4.6W AUDIO POWER AMP
S1A0134A01 DUAL PRE-POWER AMP
S1A0136A01 DUAL PRE-POWER AMP WITH VOLUME CONTROLLER
S1A0211X01 DUAL LOW NOISE EQ AMP
S1A0234B01 5 BAND DUAL GRAPHIC EQ AMP

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DIGITAL CONTROLLED AUDIO PROCESSOR S1A0501X01 GENERAL DESCRIPTION The S1A0501X01 is an audio processor for volume/tone/fader control, which is suitable for car radios or Hi-Fi system. It has a built-in trimmer for user to set a source level. R/L rear output is changable to input in the case of a home audio system for user conveniency, an external equalizer or a noise reduction circuit is selectable. When the S1A0501X01 is used with some sound-effect equipment such as graphic equalizer, the internal tone control block of S1A0501X01 can be bypassed for decreasing redundancy. All selections and function controls are designed to be controlled by an I2C-bus protocol or a general microprocessor interface protocol.