M393A8G40MB2
M393A8G40MB2 is 288pin Registered DIMM manufactured by Samsung Semiconductor.
feature table.
- Add Output Driver Temperature and Voltage Sensitivity section.
- Correct Single-ended AC & DC Output Levels table.
- Remove a x16 mode, 2Gb, 4Gb and 8Gb in Timings used for IDD, IPP and IDDQ Measurement-Loop Patterns table.
- Update TBD items.
1.Update Differential AC and DC Input Levels table.
2. Update Single-ended Levels for CK_t, CK_c table.
3. Update AC overshoot/undershoot specification for Address, mand and Control pins table.
4. Update AC overshoot/undershoot specification for Clock table.
5. Update AC overshoot/undershoot specification for Data, Strobe and Mask table.
6. Update Cross Point Voltage for Differential Input Signals (CK) table.
7. Update Differential AC and DC Input Levels for DQS table.
8. Update Differential Input Level for DQS_t, DQS_c table.
9. Update Differential Input Slew Rate for DQS_t, DQS_c table.
10. Update values for t XPR_GEAR/t XS_GEAR/t SYNC_GEAR/t CMD_GEAR/t GEAR_setup and t GEAR_hold
11. Update Derating values DDR4-2666/2933 t IS/t IH
- ac/dc based table.
12. etc,.
- Remove a 3DS and x16 mode in Function Matrix (By ORG. V:Supported, Blank:Not supported) table.
- Remove a 3DS in Function Matrix (By Speed. V:Supported, Blank:Not supported) table.
- Add...
