MPM04 Datasheet PDF (step-down DC/DC Converter)

MPM04 - step-down DC/DC Converter

This page provides the datasheet information for the MPM04, a member of the MPM01 step-down DC/DC Converter family.

Description

The MPM series is a full molded hybrid IC which contains a non-insulated buck type DC/DC converter in one package.

A power supply circuit can be composed in a simple way by using this hybrid IC which requires a small part count.

Features

& Benefits.
Current mode type synchronization rectification PWM control system.
By connecting only an input smoothing electrolytic capacitor, an output smoothing electrolytic capacitor and an output voltage setting resistor, the hybrid IC can be operated.
Since a power inductor is built in, it is not required to select and evaluate the inductor separately.
Maximum efficiency 91％.
Output current range 0 to 3A.
Operating frequency 250kHz.
Reference voltage 0.5V.

Datasheet Details

Part number	MPM04
Manufacturer	Sanken
File Size	749.60 KB
Description	step-down DC/DC Converter
Datasheet	MPM04 Datasheet
Additional preview pages of the MPM04 datasheet.

📁 Similar Datasheet

MPM-01V - Board Mount AC/DC Power Supplies (MicroPower Direct)

MPM-02V - Board Mount AC/DC Power Supplies (MicroPower Direct)

MPM-03 - 3W Ultra-Miniature DIP AC/DC Power Supplies (MicroPower Direct)

MPM-04E - Board Mount 4W Single And Dual Output AC/DC Power Supplies (MicroPower Direct)

MPM-04V - Board Mount 4W Ultra-Wide Input Range AC/DC Power Supplies (MicroPower Direct)

MPM-05D-05 - Dual & Triple Out AC/DC Power Supplies (MicroPower Direct)

MPM-05D-12 - Dual & Triple Out AC/DC Power Supplies (MicroPower Direct)

MPM-05D-15 - Dual & Triple Out AC/DC Power Supplies (MicroPower Direct)

MPM-05S-03 - Dual & Triple Out AC/DC Power Supplies (MicroPower Direct)

MPM-05S-03MM - AC/DC Power Supplies (MicroPower Direct)

Full PDF Text Transcription

Click to expand full text

Io=3A non-isorated step-down DC/DC Converter module MPM00 Series Sep./15/2015 General Descriptions The MPM series is a full molded hybrid IC which contains a non-insulated buck type DC/DC converter in one package. A power supply circuit can be composed in a simple way by using this hybrid IC which requires a small part count. By connecting only an input smoothing electrolytic capacitor, an output smoothing electrolytic capacitor and an output voltage setting resistor, the hybrid IC can be operated. Because of this simple composition, time required for design evaluation is significantly reduced. Since a power inductor is built in, it is not required to select and evaluate the inductor separately.

Published: Oct 27, 2020 |