SMA6863MZ Datasheet | Sanken

Features and Benefits Description - Built-in pre-drive IC - MOSFET power element - Alleviate noise generation by adjusting an internal resistor - CMOS patible input (5 V) - High-side gate driver using bootstrap circuit or floating power supply - Built-in protection circuit for controlling power supply voltage drop (UVLO on VB and VCC) - Overcurrent protection (OCP), overcurrent limiting (OCL), and thermal shutdown (TSD) - Output of fault signal during operation of protection circuit - Output current 1.5, 2, or 2.5 A The SMA6860MZ inverter power module (IPM) series provides a robust, highly-integrated solution for optimally controlling 3-phase motor power inverter systems and variable speed control systems used in energy-conserving designs to drive motors of residential and mercial appliances. These ICs s take 230 VAC input voltage, and up to 2.5 A (continuous) n output current. They can withstand voltages of up to 500 V (MOSFET breakdown voltage). sig The SMA6860MZ power package includes an IC with all of e the necessary power elements (six MOSFETs), pre-driver ICs D (two), and bootstrap diodes (three), needed to configure the - Small SIP (SMA 24-pin) Packages: Power SIP ew Not to scale for N Leadform Leadform 2452 main circuit of an inverter. This enables the main circuit of the inverter to be configured with fewer external ponents than traditional designs. Applications include residential white goods (home applications) and mercial appliance motor control: - Air conditioner fan - Small ventilation fan - Dishwasher pump ded Functional Block Diagram n VB1 VB2 VB3 e VCC1 mm UVLO UVLO UVLO UVLO VBB o HIN1 c HIN2 e HIN3 Input Logic High-Side Level Shift Driver R W1 SD1 W2 t V VCC 2 No UVLO LIN1 LIN2 LIN3 Input Logic (OCP Reset ) Low-Side Driver Thermal Shutdown LS2 SD2...