LA47510 - BTL Power IC

Product Overview

Sanyo Electric

Datasheet Details

Part number	LA47510
Manufacturer	Sanyo Electric
File Size	1.24 MB
Description	BTL Power IC
Datasheet	LA47510 Datasheet
Additional preview pages of the LA47510 datasheet.

Product details

Description

Standby switch function (pin 4) The Pin 4 threshold voltage is set to 2 VBE, and the amplifier turns on when Vst = 2.0 V or higher, and off when Vst = 0.7 V or lower.

In addition, Pin 4 requires an operating current of 40 µA or more.

Features

50W×4 maximum output (at VCC=14.4V, RL=4Ω).
Very low external component count.
Onchip offset detector.
Onchip offset detector shutoff switch.
Mute function.
Standby switch.
Full compliment of protection circuits (including shorting to the power supply, shorting to ground, load short-circuit, DataSheet4U. com overvoltage, thermal protection) Caution 1: Never make wrong connection. A wrong connection would cause fatal damage or perform.

📁 Similar Datasheet

LA47512 - BTL 4-Channel (Sanyo)
LA47515 - Power Amp (ETC)
LA47516 - Four-Channel 50W BTL Power Amplifier (Sanyo)
LA47501 - BTL 4ch (50W x 4) Power IC (Sanyo)
LA47503 - High-Output (50-Watt Class) Four-Channel Car Stereo BTL Power Amplifier (Sanyo)
LA47505 - Power Amplifier (ETC)
LA47536 - Four-Channel 45 W BTL Car Audio Power Amplifier (Sanyo Semicon Device)
LA4700N - 2-Channel 12W AF Power Amplifier (Sanyo)

Other Datasheets by Sanyo Electric

LA4120 - (LA4120 / LA4125) 2-Channel AF Power AMP for Radio Tape Recoder
LA4125 - (LA4120 / LA4125) 2-Channel AF Power AMP for Radio Tape Recoder
LA4126 - 2-Channel AF Power AMP
LA4126T - 2-Channel AF Power AMP
LA42152 - 15W 2ch Power Amplifier
LA4224 - 1W Monaural Power AMplifier

Published: Sep 7, 2006 |