Datasheet4U Logo Datasheet4U.com

LA73074CL - Monolithic Linear IC Video Driver

Datasheet Summary

Description

Equivalent Circuit 10 VCC 2.16V REF 1.2V 2 BUF 0.72V 2kΩ 5 GND 3 VIN 1.1V Video input pin (Sync-chip clamp (input High-impedance)) 10 VCC 2kΩ 2kΩ 200Ω 200Ω VIN GAIN SET: 6dB ⇒1.0Vp-p GAIN SET: 12dB ⇒500mVp-p GAIN SET: 9dB ⇒710mVp-p 3 2kΩ Active: ON Standby: OFF 5 GND 26kΩ 1.1V 4

Features

  • Output coupling capacity not required.
  • Low-voltage drive (VCC = 2.7V to 3.6V).
  • Νο V-sag.
  • Sextic LPF incorporated (fc = 7.5MHz).
  • Current drain of 0µA in the standby mode.
  • Amplifier gain selectable from three options (6, 12, and 9dB) (Pin control (GND/Open/VCC)).
  • Output drive capable of covering maximum 75Ω output, one channel Specifications Maximum Ratings at Ta = 25°C Parameter Maximum supply voltage Allowable power dissipation Ope.

📥 Download Datasheet

Datasheet preview – LA73074CL

Datasheet Details

Part number LA73074CL
Manufacturer Sanyo Semicon Device
File Size 98.43 KB
Description Monolithic Linear IC Video Driver
Datasheet download datasheet LA73074CL Datasheet
Additional preview pages of the LA73074CL datasheet.

📁 Similar Datasheet

  • LA73076V - Video Driver (ON Semiconductor)
  • LA73031V - Video Signal Input Switch (ON Semiconductor)
  • LA73051 - 3Ch Video Driver (Sanyo Electric)
  • LA73054 - Monolithic Linear IC (Sanyo Electric)
  • LA73060V - Wideband 75ohm Video Driver (Sanyo Electric)
  • LA73 - THERMAL SENSORS (ETC)
  • LA7311 - VTR-Use PAL/Secam Discriminator S-VHS Discriminator (Sanyo)
  • LA7316A-N - VCR VHS Chroma Signal Processor (Sanyo)
  • LA7316AM - VCR VHS Chroma Signal Processor (Sanyo)
  • LA7320 - VHS VTR Playblack Head Amplifier Recording Amplifier (Sanyo)
Other Datasheets by Sanyo Semicon Device

Full PDF Text Transcription

Click to expand full text
Ordering number : ENA0910 www.DataSheet4U.com LA73074CL Overview Monolithic Linear IC Video Driver for DSC/Cell Phone The LA73074CL is a low voltage drive (2.7V to 3.6V) video driver developed for portable appliances including digital still cameras and cell phones. It incorporates a minus-voltage generator that allows the LA73074CL to generate its output with the pedestal voltage set to 0V, so that no output coupling capacitor is required. This enables substantial reduction in mounting space without concerned about V-sag. Features • Output coupling capacity not required • Low-voltage drive (VCC = 2.7V to 3.6V) • Νο V-sag • Sextic LPF incorporated (fc = 7.
Published: |