Datasheet4U Logo Datasheet4U.com

LA9450CL - Bi-CMOS IC For Laser Diode

General Description

This is a supply terminal for a pulse driver output.

In DC luminescence mode, voltage which is bigger than VCC1, and flowing are available.

“Low” at pulse driver, and Iout output is ON.

Key Features

  • Bi-CMOS IC For Laser Diode Pulse Driver IC The LA9450CL is a pulse driver IC for laser diode that enables low voltage operation.
  • Two-power voltage design for low power consumption. Two-mode switching function of DC (supplied from VCC1: 2.4V) and pulse luminescence (supplied from VCC2: 2.8V).
  • Low voltage (VCC1=2.0V min, VCC2=2.6V min) and low current consumption (ICC1=500µA) design.
  • Low saturation PNP driver is used for DC mode for the low VCEsat.
  • Smal.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LA9410 Final Audio Output IC Sanyo
LA9200NM Analog Signal Processors Sanyo
LA9201M Analog Signal Processors Sanyo
LA9210M Analog Signal Processor Sanyo
LA9215 CD player output amplifier Sanyo

Other Datasheets by SANYO (now Panasonic)

Part Number Description
LA9211M ASP
LA9247T CD-ROM Digital Servo RF IC
LA9703W Front End Processor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Ordering number : EN7885 www.DataSheet4U.com LA9450CL Overview Features Bi-CMOS IC For Laser Diode Pulse Driver IC The LA9450CL is a pulse driver IC for laser diode that enables low voltage operation. • Two-power voltage design for low power consumption. Two-mode switching function of DC (supplied from VCC1: 2.4V) and pulse luminescence (supplied from VCC2: 2.8V). • Low voltage (VCC1=2.0V min, VCC2=2.6V min) and low current consumption (ICC1=500µA) design. • Low saturation PNP driver is used for DC mode for the low VCEsat. • Small package ECSP3020-10 (size 3×2mm, pin pitch 0.