Datasheet4U Logo Datasheet4U.com

LC72121V - PLL Frequency Synthesizers

General Description

Pin name Pin No.

Crystal oscillator element connections (4.5 or 7.2 MHz)

FMIN is selected when DVS in the serial data is set to 1.

Input frequency: 10 to 160 MHz FMIN 16 17 Local

Key Features

  • e frequency, and a low level is output when that frequency is lower. This pin goes to the highimpedance state when the frequencies match. AIN AOUT 19 20 20 21 Low-pass filter.
  • Connections for the MOS transistor used for the PLL active low-pass amplifier filter. transistor IFIN 12 13 IF counter.
  • The input frequency range is 0.4 to 12 MHz.
  • The signal is passed directly to the IF counter.
  • The result is output, MSB first, through the DO.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LC72121MA PLL Frequency Synthesizers ON Semiconductor
LC7210 (LC7220 -LC7227) Tuning Circuit of PSL Electronic Tuning System Sanyo Electric
LC72131K PLL Frequency Synthesizer ON Semiconductor
LC72131KMA PLL Frequency Synthesizer ON Semiconductor
LC72151V PLL Frequency Synthesizer Sanyo

Other Datasheets by SANYO (now Panasonic)

Part Number Description
LC72121 PLL Frequency Synthesizers
LC72121M PLL Frequency Synthesizers
LC72122V PLL Frequency Synthesizer
LC72130 AM/FM PLL Frequency Synthesizer
LC72130M AM/FM PLL Frequency Synthesizer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Ordering number : EN*5815A CMOS IC LC72121, 72121M, 72121V PLL Frequency Synthesizers for Electronic Tuning Preliminary Overview The LC72121 and the LC72121M and the LC72121V are high input sensitivity (20 mVrms at 130 MHz) PLL frequency synthesizers for 3 V systems. These ICs are serial data (CCB) compatible with the LC72131, and feature the improved input sensitivity and lower spurious radiation (provided by a redesigned ground system) required in high-performance AM/FM tuners. • I/O ports — Output-only ports: 4 pins — I/O ports: 2 pins — Supports the output of a clock time base signal. • Operating ranges — Supply voltage: 2.7 to 3.