Datasheet4U Logo Datasheet4U.com

LC75710NE - Dot Matrix VFD Display Controller/Driver

Key Features

  • 5 × 7 dot matrix VFD display controller/driver (Driver outputs can be connected directly to VFD devices: pull-down resistors are not required. ).
  • Display technique: Dynamic lighting technique.
  • Display digits: 1 to 16 digits (programmable).
  • Display control data CGROM: 5 × 7 dots, 160 characters CGRAM: 5 × 7 dots, 8 characters ADRAM: 16 × 8 bits DCRAM: 64 × 8 bits.
  • Instruction functions Display on/off control Display shift Display blink Intensity adjust.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LC75700T Key Scan IC ON Semiconductor
LC75 1500 Watt Low Capacitance Transient Voltage Suppressor Microsemi
LC7500 Electronic Volume Controller Sanyo Electric
LC75055PE Car Audio DSP ON Semiconductor
LC75056PE Car Audio DSP ON Semiconductor

Other Datasheets by SANYO (now Panasonic)

Part Number Description
LC75711NE Dot Matrix VFD Display Controller/Driver
LC75712E Dot Matrix VFD Display Controller/Driver
LC7570 Static Drivers
LC7570E Static Driver
LC75725E 1/4 to 1/11 Duty Dynamic Drive VFD Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Ordering number : EN*4907 CMOS LSI LC75710NE, 75711NE, 75712E Dot Matrix VFD Display Controller/Driver Preliminary Overview The LC75710NE series products are dot matrix VFD controller/driver LSIs that display characters, numbers, and symbols. These LSIs generate dot matrix VFD drive signals based on serial data sent from a microprocessor, and allow display systems to be implemented easily using the built-in character generator ROM and RAM. The LC75710NE series products are fabricated in a CMOS process and can contribute to achieving low-power operation in user applications. Features • 5 × 7 dot matrix VFD display controller/driver (Driver outputs can be connected directly to VFD devices: pull-down resistors are not required.