LC7574NE Datasheet PDF (1/2 Duty VFD Driver) | Download Sanyo Semicon Device LC7574NE

LC7574NE - 1/2 Duty VFD Driver

Description

Consider the examples shown in Figure 4, where data is set up so that the segment outputs S1 to S37 output a low level on the G1 digit output timing and a high level on the G2 digit output timing.

(Here, the G2 side being lighted) 2.

Features

74 segment outputs.
Noise reduction circuits are built into the output drivers.
Serial data input supports CCB.
format communications with the system controller.
Switching between digital and analog dimmers under serial data control.
High generality since display data is displayed without the intervention of a decoder.
All segments can be turned off with the BLK pin SANYO: QFP48E.
CCB is a trademark of SANYO.

Datasheet Details

Part number	LC7574NE
Manufacturer	Sanyo Semicon Device
File Size	190.68 KB
Description	1/2 Duty VFD Driver
Datasheet	LC7574NE Datasheet
Additional preview pages of the LC7574NE datasheet.

📁 Similar Datasheet

LC75700T - Key Scan IC (ON Semiconductor)

LC75 - 1500 Watt Low Capacitance Transient Voltage Suppressor (Microsemi)

LC7500 - Electronic Volume Controller (Sanyo Electric)

LC75055PE - Car Audio DSP (ON Semiconductor)

LC75056PE - Car Audio DSP (ON Semiconductor)

LC7510 - (LC7512) CMOS IC (Sanyo)

LC75106V - Digital Echo LSI (ON Semiconductor)

LC7512 - (LC7510) CMOS IC (Sanyo)

LC7520 - Electronic Volume Control (Sanyo Electric)

LC7522 - ELECTORONIC VOLUME CONTROL (Sanyo)

Full PDF Text Transcription

Click to expand full text

Ordering number : EN3586A CMOS LSI LC7574NE, 7574NW 1/2 Duty VFD Driver for Frequency Display Overview The LC7574NE and LC7574NW are 1/2 duty VFD drivers that can be used for electronic tuning frequency display and other applications under the control of a controller. These products can directly drive VFDs with up to 74 segments. Package Dimensions unit: mm 3156-QFP48E [LC7574NE] Features • 74 segment outputs • Noise reduction circuits are built into the output drivers. • Serial data input supports CCB* format communications with the system controller.

Published: Mar 22, 2005 |