LC89075W-H Datasheet | SANYO

.Data Sheet.co.kr Ordering number : ENA1858A CMOS IC 1. Overview Digital Audio Interface Receiver with Stereo ADC and Audio Selector The LC89075W-H is a digital audio interface receiver that demodulates signals according to the data transfer format between digital audio devices via IEC60958/61937 and JEITA CPR-1205 and supports demodulation sampling frequencies of up to 192k Hz. The LC89075W-H also incorporates a high performance 24-bit single-end input ΔΣ stereo analog to digital converter that supports sampling frequencies of up to 96k Hz, and an audio selector that can support 8-channel data. The LC89075W-H is a plete analog and digital front-end for use in various systems including AV receivers, digital TVs, and DVD recorders. 2. Features 2.1 ADC - ΔΣ stereo ADC - Built-in anti-aliasing digital filter - Single-end input (3Vp-p) - Built-in digital HPF for canceling DC offset - Built-in PGA (-4.5d B to 6d B/1.5d B step) - Built-in soft mute and attenuator (0d B to -63.5d B/0.25d B step, -∞) - Sampling frequency: 8k Hz to 96k Hz - Master clock: 512fs, 256fs (master/slave) - Audio data output interface: 24-bit I2S/left justified - Analog audio data detection (threshold level: -30d B to -60d B/adjustable in 2d B steps) Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other...