Datasheet4U Logo Datasheet4U.com

LV4904V - Class-D Audio Power Amplifier

General Description

Reset input (low active) System enable input Master clock input 3-wire serial bit clock input 3-wire serial LR clock input 3-wire serial data input Input format setting input 0 Input format setting input 1 Input format setting input 2 Master clock (MCK) rate setting pin Input data sampling rate sett

Key Features

  • I2S input, 2-channel class-D power amplifier.
  • On-chip variable over-sampler.
  • Gain controller (+12dB to -81dB, in 1.5 dB increments).
  • Soft mute function.
  • Controllable via I2C bus or pin settings.
  • Under voltage protection circuit, overcurrent protection circuit, thermal protection circuit integrated Functions.
  • Input PCM (Fs): 32 kHz/44.1 kHz/48 kHz/88.1 kHz/96 kHz/176.2 kHz/192 kHz.
  • Master clock input: 256 fs/384 fs/512 fs/7.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet.co.kr Ordering number: ENA1963 LV4904V Overview Monolithic IC Digital Input Class-D Power Amplifier The LV4904V is a 2-channel class-D amplifier IC that supports digital input. With this single chip and with a minimal number of external components, it is possible to effectively implement class-D amplifiers. The LV4904V incorporates a soft mute function and a gain controller without pop noise, and can be used as a master volume control of the set. Its function settings can be established through an I2C bus interface, but it is also possible to establish these settings simply by pin settings without using the I2C bus.