Datasheet4U Logo Datasheet4U.com

LV4993TH - Monaural BTL Power Amplifier

Description

Pin voltage Pin No.

When OPEN : BTL mode When external is impressed BTL mode at 1.6V to VCC SE mode at 0 to o.3V VCC VCC CNT 2 GND 3 S

Features

  • shown in Figure 1 when the standby function is not used. Please set.

📥 Download Datasheet

📁 Similar Datasheet

  • LV4904V - Digital Input Class-D Power Amplifier (ON Semiconductor)
  • LV4910T - Class-D Audio Power Amplifier (ON Semiconductor)
  • LV49152V - Class-D Audio Power Amplifier (ON Semiconductor)
  • LV49157V - Class-D Audio Power Amplifier (ON Semiconductor)
  • LV4924VH - Class-D Audio power Amplifier (ON Semiconductor)
  • LV40100BCT - Schottky Barrier Diode (BLUE ROCKET ELECTRONICS)
  • LV40100CT - Schottky Barrier Diode (BLUE ROCKET ELECTRONICS)
  • LV40100FCT - Schottky Barrier Diode (BLUE ROCKET ELECTRONICS)
  • LV40100PT - Schottky Barrier Diode (BLUE ROCKET ELECTRONICS)
  • LV40150CT - Schottky Barrier Diode (BLUE ROCKET ELECTRONICS)
Other Datasheets by Sanyo Semicon Device
  • LV4993M - Monaural BTL Power Amplifier
  • LV4991M - Monaural BTL Power Amplifier
  • LV4991TH - Monaural BTL Power Amplifier
  • LV4991TT - Monaural BTL Power Amplifier
  • LV4992TT - Stereo SE Power Amplifier
  • LV4900H - Class-D Audio Power Amplifier
  • LV4900HR - Class-D Audio Power Amplifier
  • LV4901H - Class-D Audio Power Amplifier

Full PDF Text Transcription

Click to expand full text
www.DataSheet.co.kr Ordering number : ENA1834D Bi-CMOS IC LV4993TH Overview For Portable Audio Equipment Monaural BTL Power Amplifier LV4993TH built-in the power amplifier circuit operable at low voltage (1.8V or more) and has additionally the standby function to reduce the current drain. It is power amplifier IC optimal for speaker drive used in battery-driven portable equipment and the low output power system equipment. Application IC recorder, Portable-TV, Radio, Portable-NAVI, LCD-monitor, Digital-photo-frame, and etc. Function and Feature • Monaural BTL power amplifier built-in Standard output power 1 = 1.5W (VCC = 5V, RL = 8Ω, THD = 10%) Standard output power 2 = 0.
Published: |