Datasheet4U Logo Datasheet4U.com

LV5217GP - 3ch LED Driver

General Description

Control inputs for the three external colored LEDs.

When an RSW, GSW, or BSW bit in the serial data is set to 1, the corresponding LED will be on when the voltage applied to the corresponding pin is high, and off when the voltage applied is low.

Key Features

  • Three color LED driver circuits.
  • The LED current can be switched independently in 7-bit units (0.31 to 25.48mA).
  • Independent on/off control of the three LED drivers (independent control of the 3 RGB colors).
  • Each LED drive current level can be adjusted independently over the I2C bus.
  • Miniature package.
  • Thermal shutdown circuit. Specifications Absolute Maximum Ratings at Ta = 25°C Parameter Supply voltage 1 Supply voltage 2 Maximum inpu.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LV52130A0XA 1coil Boost DC-DC converter and Inverter Charge Pump ON Semiconductor
LV52130A4XA 1coil Boost DC-DC converter and Inverter Charge Pump ON Semiconductor
LV52133A Programmable DC-DC Converter ON Semiconductor
LV5213LP 3ch LED Driver ON Semiconductor
LV52207AXA Dual channel LED Boost Driver ON Semiconductor

Other Datasheets by SANYO (now Panasonic)

Part Number Description
LV5212VH 8ch LED Driver
LV5213LP 3ch LED Driver
LV5215LF 4ch LED Driver
LV5216CS LED Driver
LV5223GR LED Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet.co.kr Ordering number : ENA0833A LV5217GP Overview Bi-CMOS IC 3ch LED Driver This LV5217GP is 3-channel LED driver for cell phones. Each LED driver current can be adjusted by I2C bus. LV5217GP can perform various illumination effects with a full-color LED display. Features • Three color LED driver circuits. • The LED current can be switched independently in 7-bit units (0.31 to 25.48mA). • Independent on/off control of the three LED drivers (independent control of the 3 RGB colors). • Each LED drive current level can be adjusted independently over the I2C bus. • Miniature package. • Thermal shutdown circuit.