LV8712T Datasheet PDF (PWM Constant-Current Control Stepping Motor Driver)

LV8712T - PWM Constant-Current Control Stepping Motor Driver

Description

Stepping motor control (1) Power save function This IC is switched between standby and operating mode by setting the PS pin.

In standby mode, the IC is set to power-save mode and all logic is reset.

In addition, the internal regulator circuit do not operate in standby mode.

Features

Single-channel PWM constant-current control stepping motor driver incorporated.
Excitation mode can be set to 2-phase, 1-2 phase, W1-2 phase , or 2W1-2 phase.
Microstep can control easily by the CLK-IN input.
Power-supply voltage of motor : VM max = 18V.
Output current : IO max = 0.8A.
Output ON resistance : RON = 1.1Ω (upper and lower total, typical, Ta = 25°C ).
A thermal shutdown circuit and a low voltage detecting circuit are.

Datasheet Details

Part number	LV8712T
Manufacturer	Sanyo Semicon Device
File Size	310.57 KB
Description	PWM Constant-Current Control Stepping Motor Driver
Datasheet	LV8712T Datasheet
Additional preview pages of the LV8712T datasheet.

📁 Similar Datasheet

LV8712T - PWM Constant-Current Control Stepping Motor Driver (ON Semiconductor)

LV8711T - PWM Constant-Current Control Stepping Motor Driver (ON Semiconductor)

LV8713T - PWM Constant-Current Control Stepping Motor Driver (ON Semiconductor)

LV8714TA - Dual Stepper Motor Driver (ON Semiconductor)

LV8702V - PWM Current Control High-efficient Stepper Motor Driver (ON Semiconductor)

LV8726TA - Stepper Motor Pre-Driver (ON Semiconductor)

LV8727 - PWM Current Control Stepping Motor Driver (ON Semiconductor)

LV8728MR - Stepper Motor Driver (ON Semiconductor)

LV8729V - PWM Constant-Current Control Stepper Motor Driver (ON Semiconductor)

LV8731V - PWM Constant-Current Control Stepping Motor Driver (ON Semiconductor)

Full PDF Text Transcription

Click to expand full text

www.DataSheet.co.kr Ordering number : ENA1674A LV8712T Overview Bi-CMOS LSI PWM Constant-Current Control Stepping Motor Driver The LV8712T is a stepping motor driver of the micro-step drive corresponding to supports 2W 1-2 phase excitation. It is the best for the drive of the stepping motor for a scanner and a small printer. Features • Single-channel PWM constant-current control stepping motor driver incorporated. • Excitation mode can be set to 2-phase, 1-2 phase, W1-2 phase , or 2W1-2 phase • Microstep can control easily by the CLK-IN input. • Power-supply voltage of motor : VM max = 18V • Output current : IO max = 0.8A • Output ON resistance : RON = 1.1Ω (upper and lower total, typical, Ta = 25°C ) • A thermal shutdown circuit and a low voltage detecting circuit are built into.

Published: Jan 5, 2012 |