STK401-140 Datasheet | SANYO

Ordering number:ENN4898 Thick Film Hybrid IC 2ch AF Power Amplifier (Split Power Supply) (120W + 120W min, THD = 0.4%) Overview A major feature of Sanyo thick-film power amplifier ICs is that all ICs within a given product series are pin patible. This allows users to construct a product line of amplifiers with differing power output capacities using the same PCB design by simply changing the hybrid IC used. Sanyo has now developed a new series that expands this intraseries pin patibility to also provide patibility between certain series. Adoption of the ICs in this new series also allows the development of both two- and three-channel amplifiers on the same PCB. Furthermore, this new series supports 3 and 6 Ω drive to handle the recent trend toward lower impedance speakers. Features - Pin patibility STK400-000 series (three channels/single package) ↓ STK401-000 series (two channels/single package) - Support for output load impedances of 3 or 6 Ω - New pin assignment The new pin assignment groups the input, output, and power supply systems into separate blocks. This minimizes characteristic degradation due to problems with the PCB pattern layout. - Minimal number of required external ponents The bootstrap resistor and capacitor required in earlier series are no longer necessary. Package Dimensions unit:mm 4029 [STK401-140] 78.0 70.0 1 (15.95) 2.54 0.5 15×2.54=38.1 21.5 44.0 4.0 26.5 2.9 0.4 5.5 SANYO : SIP16 Specifications Maximum Ratings at Ta = 25˚C Parameter Maximum supply voltage Thermal resistance Junction temperature Operating substrate temperature Storage temperature Available time for load short-circuit Symbol VCC max θ j-c Tj Tc Tstg ts Conditions Per power transistor VCC=±51V, RL=6Ω, f=50Hz, PO=120W Ratings ±74 1.0 150 125 - 30 to +125 0.5 Unit...