STK402-250 Datasheet | SANYO

Ordering number : ENN7071 Thick-Film Hybrid IC Three-Channel Class AB Audio Power Amplifier IC 30 W + 30 W + 30 W Overview The STK402-200 series products are audio power amplifier hybrid ICs that consist of optimally-designed .. discrete ponent power amplifier circuits that have been miniaturized using SANYO's unique insulated metal substrate technology (IMST). SANYO has adopted a new low thermal resistance substrate in these products to reduce the package size by about 60% as pared to the earlier SANYO STK408-000 series. Package Dimensions unit: mm 4191-SIP19 [STK402-250] Features - Series of pin patible power amplifiers ranging from 20 W × 3 channels to 60 W × 3 channels (10%/1 k Hz) devices. The same printed circuit board can be used depending on the output power grade. - The pin arrangement is patible with that of the 2channel STK402-000 series. This means that 3-channel printed circuit boards can also be used for 2-channel products. - Miniature packages - 15 W/ch to 40 W/ch (THD = 0.4%, f = 20 Hz to 20 k Hz); 59.2 mm × 31.0 mm × 8.5 mm - - : Not including the pins. - Achieves superlative heat dissipation due to the adoption of SANYO's Insulated Metal Substrate Technology (IMST). - Output load impedance: RL = 6 Ω - Allowable load shorted time: 0.3 seconds - Supports the use of standby, muting, and load shorting protection circuits. SANYO: SIP19 Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed,...