Built-in overcurrent detection function (output current OFF).
Built-in overheat detection function (output current OFF).
If either over-current or overheat detection function is activated, the FAULT1 signal (active low) is output. The FAULT2 signal is used to output the result of activation of protection circuit detection at 2 levels.
Built-in power on reset function.
A micro-step sine wave-driven driver can be activated merely by inputting an ex.
Full PDF Text Transcription for STK672-440A-E (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
STK672-440A-E. For precise diagrams, and layout, please refer to the original PDF.
www.DataSheet.co.kr Ordering number : ENA1128B STK672-440A-E Overview Thick-Film Hybrid IC 2-phase Stepping Motor Driver The STK672-440A-E is a hybrid IC for use as a uni...
View more extracted text
tepping Motor Driver The STK672-440A-E is a hybrid IC for use as a unipolar, 2-phase stepping motor driver with PWM current control. Applications • Office photocopiers, printers, etc. Features • Built-in overcurrent detection function (output current OFF). • Built-in overheat detection function (output current OFF). • If either over-current or overheat detection function is activated, the FAULT1 signal (active low) is output. The FAULT2 signal is used to output the result of activation of protection circuit detection at 2 levels. • Built-in power on reset function. • A micro-step sine wave-driven driver can be activated me
STK672-440A-E Datasheet
