Datasheet4U Logo Datasheet4U.com

STK740-470 Datasheet 5v/5a Single Output Separate Excitation Chopper Regulator

Manufacturer: SANYO (now Panasonic)

Overview: Ordering number:EN*6107 Thick Film Hybrid IC STK740-470 5V/5A Single Output Separate Excitation Chopper Regulator Preliminary Overview The STK740-470 is a separate-excitation step-down chopper regulator hybrid IC for the secondstage circuit. This IC incorporates in the package all the necessary circuits for a chopper regulator including power switch, error amplifier, soft start, shutdown type output short protection, low-voltage malfunction prevention, on/off, and snubber circuits. Therefore, external ponents required are input and output capacitors and a choke coil only and this allows this IC to be used to construct a large-current (5A) chopper regulator as if a 3-pin regulator were used. DC8V to 18V input voltage can be handled and up to 5A of output current is supported. Package Dimensions unit:mm 4170-SIP28 [STK740-470] 46.6 41.2 8.5 12.7 1 2.54 (6.63) 4.0 12 0.5 1.0 3.6 25.5 0.4 2.9 Applications • Local power supply for the equipment of which input rating is DC9V to 15V. 11×2.54=27.

Key Features

  • Adoption of Sanyo IMST ; Insulated Metal Substrate Technology, allows the circuit to be operated without using a heat sink (see “No Fin Output Current Derating” chart in the page 6).
  • Typical efficiency of 90% at DC 12V input, 2.5A output.
  • Fine adjustment of output voltage enable.
  • 50 kHz operating frequency.
  • Low-RON resistance power MOSFET adopted.
  • Low-VF Schottky barrier diode adopted. Any and all SANYO products described or contained.

STK740-470 Distributor