Datasheet4U Logo Datasheet4U.com

LB1832V - Low-Saturation 1.5-Channel 3V Drive Bidirectional Driver

Key Features

  • Supports low-voltage drive.
  • When the same power supply is used for VCC and VS: VCC = VS = 1.6 V min.
  • When different power supplies are used for VCC and VS: VS = 1.0 V min, VCC = 2.5 V min.
  • Low saturation voltage (Upper side transistor plus lower side transistor remaining voltage: 0.6 V (typ) at 1 A).
  • Zero current drain in standby mode.
  • 1.5-channel bidirectional driver that can be directly driven from the control microprocessor.
  • S.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LB1837M Low-voltage/Low-saturation Bidirectional Constant-Voltage Regulated Motor Driver ON Semiconductor
LB1838JM Low-Saturation Bidirectional Motor Driver Sanyo Semicon Device
LB1838M Bidirectional Motor Driver ON Semiconductor
LB1800CL Stepping Motor Driver Sanyo Semicon Device
LB1801CL Stepping Motor Driver Sanyo Semicon Device

Other Datasheets by SANYO (now Panasonic)

Part Number Description
LB1830 Low-Saturation Bidirectional Motor Driver
LB1830M Low-Saturation Bidirectional Motor Driver
LB1831M Low-Saturation Bidirectional Motor Driver
LB1833M Low-Saturation Bidirectional Motor Driver
LB1834 Low-Saturation Bidirectional Motor Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Ordering number : EN4179A Monolithic Digital IC LB1832V Low-Saturation 1.5-Channel 3 V Drive Bidirectional Driver Overview The LB1832V is a bidirectional driver IC that includes an on-chip low-voltage low-saturation 1.5-channel bridge and is provided in a miniature package. It is therefore optimal for cameras that use 3 V lithium batteries. This IC allows direct drive from the control microprocessor and supports control of standby, forward, reverse, and braking operations for two motors, i.e. the film take-up and lens drive motors, from three inputs. Package Dimensions unit: mm 3175A-SSOP24 [LB1832V] Features • Supports low-voltage drive. — When the same power supply is used for VCC and VS: VCC = VS = 1.6 V min. — When different power supplies are used for VCC and VS: VS = 1.