Datasheet4U Logo Datasheet4U.com

LC72151V - PLL Frequency Synthesizer

Key Features

  • a fast locking circuit. Functions.
  • High-speed programmable divider.
  • FMIN: 10 to 160 MHz: Pulse swallower type.
  • AMIN: 2 to 40 MHz: Pulse swallower type 0.5 to 10 MHz: Direct division type.
  • IF counter.
  • HCTR: 0.4 to 25 MHz: for FM IF count.
  • LCTR: 10 to 500 kHz: for AM IF count 1.0 to 20 × 103 Hz: for frequency measurement.
  • Reference frequency.
  • One of 11 frequencies may be selected (when a 10.25 or 10.35 MHz crystal is used) 50,.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LC7215 MW/LW PLL Frequency Synthesizers Sanyo Semicon Device
LC7215F MW/LW PLL Frequency Synthesizers Sanyo Semicon Device
LC7215FM MW/LW PLL Frequency Synthesizers Sanyo Semicon Device
LC7210 (LC7220 -LC7227) Tuning Circuit of PSL Electronic Tuning System Sanyo Electric
LC72121 PLL Frequency Synthesizers Sanyo Semicon Device

Other Datasheets by SANYO (now Panasonic)

Part Number Description
LC7207 (LC7200 Series) C-MOS LSI
LC723781N ETR Microcontrollers
LC723782N ETR Microcontrollers
LC723783N ETR Microcontrollers
LC723784 ETR Microcontrollers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Ordering number : ENN6976A CMOS IC LC72151V PLL Frequency Synthesizer for Electronic Tuning in Car Audio Systems Overview The LC72151V is a PLL frequency synthesizer for car audio systems. It can implement high-performance multifunction tuners such as RDS tuners and features a fast locking circuit. Functions • High-speed programmable divider — FMIN: 10 to 160 MHz: Pulse swallower type — AMIN: 2 to 40 MHz: Pulse swallower type 0.5 to 10 MHz: Direct division type • IF counter — HCTR: 0.4 to 25 MHz: for FM IF count — LCTR: 10 to 500 kHz: for AM IF count 1.0 to 20 × 103 Hz: for frequency measurement • Reference frequency — One of 11 frequencies may be selected (when a 10.25 or 10.35 MHz crystal is used) 50, 30*, 25, 12.5, 10, 9*, 6.25, 5, 3.125, 3*, 1 kHz Note: Cannot be used when a 10.