STK621-015
STK621-015 is IGBT 600V/10A High Speed manufactured by SANYO.
SANYO INVERTER POWER HYBRID MODULE
SIP Full Molded Package
TENTATIVE
IGBT 600V/10A High Speed
1. Overview: This IC is a 3-phase Inverter power hybrid IC containing power elements (IGBT and FRD), pre-driver, over-current protection circuit. 2. Application: 3-phase Inverter Motor. Induction Motor. Blushless-DC Motor 3. Features
:
- Integrates power elements (IGBT and FRD), pre-driver, and protective circuit.
- Protective circuits including over-current (bus line), and pre-drive low voltage protection are built in.
- Direct input of CMOS level control signals without an insulating circuit (photo-coupler, etc) is possible.
- A single power supply drive is enabled through the use of bootstrap circuits for upper power supplies. (externally set)
- Built-in simultaneous upper/lower ON prevention circuit to prevent arm shorting through simultaneous ON input for the upper and lower side transistors. (Dead time is required for preventing shorting due to switching delay.)
- SIP (The single in-line package) of the transfer full mold structure. 4....
