855833 - SAW Split Band Filter

General Description

Input band #1 Input band #2 Output band #2 Output band #1 Case ground Last Updated: 14-May-2001 Page 1 of 7 Data Sheet Part Number 855833 1880 MHz SAW Split Band Filter Band #1 Electrical Specifications (1) Operating Temperature Range: (2) Parameter (3) Center Frequency Maximum Insertion Loss

Key Features

For PCS.

📥 Download Datasheet

855833 saw split band filter by Sawtek - Datasheet Preview

Datasheet Details

Part number	855833
Manufacturer	Sawtek
File Size	538.00 KB
Description	SAW Split Band Filter
Datasheet	855833 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
8550	GENERAL DESCRIPTION	Micro Electronics
8550	PNP TRANSISTOR	Stanson Technology
8550	Silicon PNP transistor	BLUE ROCKET ELECTRONICS
85500	Super-Flat RJ45 Compression Jack	Molex Electronics
8550M	Silicon PNP transistor	BLUE ROCKET ELECTRONICS

Other Datasheets by Sawtek

Part Number	Description
855845	Bandpass filter
855399	SAW Filter
855969	SAW Filter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

Data Sheet Part Number 855833 1880 MHz SAW Split Band Filter Features • For PCS applications • Usable bandwidth 30 MHz (each band) • Low loss • No impedance matching required for operation at 50 Ω • Single-ended operation • Ceramic Surface Mount Package (SMP) • Small size • Package Surface Mount 3.0 x 3.0 x 1.22 mm 1.22 NOM. 1.32 MAX. 0.69 3.00 3.00 0.60 1.20 0.60 0.75 Dimensions shown are nominal in millimeters All tolerances are ±0.15mm except overall length and width ±0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0µm, over a 2 - 6µm Ni plating Subject to change or obsolescence without notice Pin Configuration 1 2 3 8 4 7 6 5 Pad No.