856062 - SAW Filter

General Description

RF output RF input Ground Case ground Case ground Rev - 16-Jul-2002 Page 1 of 5 Preliminary Data Sheet Part Number 856062 140 MHz SAW Filter Electrical Specifications (1) Operating Temperature Range: (2) Parameter (3) Center Frequency Minimum Insertion Loss Lower 1 dB Bandedge (4) Upper 1 dB

Key Features

For IF.

📥 Download Datasheet

856062 saw filter by Sawtek - Datasheet Preview

Datasheet Details

Part number	856062
Manufacturer	Sawtek
File Size	586.55 KB
Description	SAW Filter
Datasheet	856062 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
8560GP	LUCL8560GP	Agere Systems
8561	POWER FACTOR CORRECTOR	Unisonic Technologies
856326	1575.42 MHz SAW Filter	TriQuint Semiconductor
856327	915 MHz SAW Filter	TriQuint Semiconductor
856512	168.5MHz SAW Filter	TriQuint Semiconductor

Other Datasheets by Sawtek

Part Number	Description
856020	SAW Filter
856072	SAW Filter
856278	SAW Filter
856298	SAW Filter
856314	SAW Filter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

Preliminary Data Sheet Features • For IF applications • Typical 3 dB bandwidth of 0.75 MHz • High attenuation • Single-ended operation • Ceramic Surface Mount Package (SMP) • Replaces Sawtek P/N 851902 (BW 3dB = 0.75MHz) • Part Number 856062 140 MHz SAW Filter Package Surface Mount 19.00 x 6.50 x 1.75 mm 0.76 1.80 6.50 1.75 NOM. 1.96 MAX. 19.0 1.91 1.02 R0.51 2.31 Dimensions shown are nominal in millimeters All tolerances are ±0.15mm except overall length and width +0.15mm/-0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0µm, over a 2 - 6µm Ni plating Subject to change or obsolescence without notice Pin Configuration Bottom View 123 45 10 9 8 7 6 Pin No.