Datasheet4U Logo Datasheet4U.com

856331 - SAW Duplexer

General Description

Tx Antenna Rx Case ground Case ground Dimensions shown are nominal in millimeters All tolerances are ±0.15mm except overall length and width ±0.10mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0µm, over a 2 - 6µm Ni plating Subject to change or obsolescence without n

Key Features

  • For AMPS, CDMA and TDMA.

📥 Download Datasheet

Datasheet Details

Part number 856331
Manufacturer Sawtek
File Size 767.78 KB
Description SAW Duplexer
Datasheet download datasheet 856331 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
856326 1575.42 MHz SAW Filter TriQuint Semiconductor
856327 915 MHz SAW Filter TriQuint Semiconductor
8560GP LUCL8560GP Agere Systems
8561 POWER FACTOR CORRECTOR Unisonic Technologies
856512 168.5MHz SAW Filter TriQuint Semiconductor

Other Datasheets by Sawtek

Part Number Description
856314 SAW Filter
856020 SAW Filter
856062 SAW Filter
856072 SAW Filter
856278 SAW Filter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com Data Sheet Features • • • • • • • • • • For AMPS, CDMA and TDMA applications Usable bandwidth 25 MHz (each band) High Tx-Rx isolation Low insertion loss High attenuation Single-ended operation No matching required for operation at 50Ω Ceramic Surface Mount Package (SMP) Hermetic RoHS compliant (2002/95/EC), Pb-free Pb Part Number 856331 836.5/881.5 MHz SAW Duplexer • Package Surface Mount 3.80 x 3.80 x 1.47 mm Pin Configuration Bottom View 1 2 3 1.47 NOM. 1.65 MAX. 12 4 5 6 0.86 11 10 3.80 1.60 0.80 0.60 0.90 9 8 7 3.80 0.45 0.41 SQ. 0.15x45° CHAMFER Pin No. 5 8 11 1,2,3,4,6 7,9,10,12 Description Tx Antenna Rx Case ground Case ground Dimensions shown are nominal in millimeters All tolerances are ±0.15mm except overall length and width ±0.