Datasheet4U Logo Datasheet4U.com

EM3502 - Compact Power and Energy Meter Manual

Datasheet Summary

Description

Measurement Accuracy Real Power and Energy IEC 62053-22 Class 0.5S, ANSI C12.20 0.5% Reactive Power and Energy IEC 62053-23 Class 2, 2% Current Voltage Sample Rate 0.4% (+0.015% per °C deviation from 25°C) from 5% to 100% of range; 0.8% (+0.015% per °C deviation from 25°C) from 1% to 5% of ran

📥 Download Datasheet

Datasheet preview – EM3502

Datasheet Details

Part number EM3502
Manufacturer Schneider
File Size 1.00 MB
Description Compact Power and Energy Meter Manual
Datasheet download datasheet EM3502 Datasheet
Additional preview pages of the EM3502 datasheet.

📁 Similar Datasheet

  • EM3503 - Euro-Mag Terminal Blocks (Cooper Bussmann)
  • EM3581 - Integrated ZigBee/802.15.4 System-on-Chip (Silicon Laboratories)
  • EM3582 - Integrated ZigBee/802.15.4 System-on-Chip (Silicon Laboratories)
  • EM3585 - Integrated ZigBee/802.15.4 System-on-Chip (Silicon Laboratories)
  • EM3586 - Integrated ZigBee/802.15.4 System-on-Chip (Silicon Laboratories)
  • EM3587 - Integrated ZigBee/802.15.4 System-on-Chip (Silicon Laboratories)
  • EM3588 - Integrated ZigBee/802.15.4 System-on-Chip (Silicon Laboratories)
  • EM3591 - 32-bit Processor (Silicon Laboratories)
  • EM3592 - 32-bit Processor (Silicon Laboratories)
  • EM3595 - 32-bit Processor (Silicon Laboratories)
Other Datasheets by Schneider
  • EM3550 - Compact Power and Energy Meter Manual

Full PDF Text Transcription

Click to expand full text
EM3502, EM3550 Compact Power and Energy Meter Installation Guide ZL0092-0A 11/2011 EM3502, 3550  HAZARD CATEGORIES AND SPECIAL SYMBOLS PLEASE NOTE FCC NOTICE ZL0092-0A 11/2011 Read these instructions carefully and look at the equipment to become familiar with the device before trying to install, operate, service or maintain it. The following special messages may appear throughout this bulletin or on the equipment to warn of potential hazards or to call attention to information that clarifies or simplifies a procedure. The addition of either symbol to a “Danger” or “Warning” safety label indicates that an electrical hazard exists which will result in personal injury if the instructions are not followed. This is the safety alert symbol.
Published: |