Datasheet4U Logo Datasheet4U.com

EM3550 - Compact Power and Energy Meter Manual

Download the EM3550 datasheet PDF. This datasheet also covers the EM3502 variant, as both devices belong to the same compact power and energy meter manual family and are provided as variant models within a single manufacturer datasheet.

General Description

Measurement Accuracy Real Power and Energy IEC 62053-22 Class 0.5S, ANSI C12.20 0.5% Reactive Power and Energy IEC 62053-23 Class 2, 2% Current Voltage Sample Rate 0.4% (+0.015% per °C deviation from 25°C) from 5% to 100% of range; 0.8% (+0.015% per °C deviation from 25°C) from 1% to 5% of ran

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (EM3502-Schneider.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number EM3550
Manufacturer Schneider
File Size 1.00 MB
Description Compact Power and Energy Meter Manual
Datasheet download datasheet EM3550 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
EM3503 Euro-Mag Terminal Blocks Cooper Bussmann
EM3581 Integrated ZigBee/802.15.4 System-on-Chip Silicon Laboratories
EM3582 Integrated ZigBee/802.15.4 System-on-Chip Silicon Laboratories
EM3585 Integrated ZigBee/802.15.4 System-on-Chip Silicon Laboratories
EM3586 Integrated ZigBee/802.15.4 System-on-Chip Silicon Laboratories

Other Datasheets by Schneider

Part Number Description
EM3502 Compact Power and Energy Meter Manual

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
EM3502, EM3550 Compact Power and Energy Meter Installation Guide ZL0092-0A 11/2011 EM3502, 3550  HAZARD CATEGORIES AND SPECIAL SYMBOLS PLEASE NOTE FCC NOTICE ZL0092-0A 11/2011 Read these instructions carefully and look at the equipment to become familiar with the device before trying to install, operate, service or maintain it. The following special messages may appear throughout this bulletin or on the equipment to warn of potential hazards or to call attention to information that clarifies or simplifies a procedure. The addition of either symbol to a “Danger” or “Warning” safety label indicates that an electrical hazard exists which will result in personal injury if the instructions are not followed. This is the safety alert symbol.