Datasheet4U Logo Datasheet4U.com

S-24C08C - 2-WIRE SERIAL E2PROM

Key Features

  • Operating voltage range Read: 1.6 V to 5.5 V Write: 1.7 V to 5.5 V.
  • Page write: 16 bytes / page.
  • Sequential read.
  • Operation frequency:.
  • Write time: 400 kHz (VCC = 1.6 V to 5.5 V) 5.0 ms max.
  • Noise suppression Schmitt trigger and noise filter on input pins (SCL, SDA).
  • Write prote.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
S-24C08C 2-WIRE SERIAL E2PROM ABLIC
S-24C08CxxH 2-WIRE SERIAL E2PROM ABLIC
S-24C08A CMOS 2-WIRED SERIAL EEPROM Seiko
S-24C08D 2-WIRE SERIAL E2PROM ABLIC
S-24C01A CMOS 2-WIRE SERIAL EEPROM Seiko

Other Datasheets by Seiko Instruments

Part Number Description
S-24C128C 2-WIRE SERIAL E2PROM
S-24C32C 2-WIRE SERIAL E2PROM
S-24C64C 2-WIRE SERIAL E2PROM
S-24CS01A 2-Wire CMOS Serial EPROM
S-24CS02A 2-Wire CMOS Serial EPROM

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
S-24C08C (WLP PRODUCT) www.sii-ic.com © SII Semiconductor Corporation, 2016 2-WIRE SERIAL E2PROM Rev.1.0_00_H The S-24C08C is a 2-wire, low current consumption and wide range operation serial E2PROM. The S-24C08C has the capacity of 8 K-bit, and the organization is 1024 words × 8-bit. Page write and sequential read are available. Caution This product is intended to use in general electronic devices such as consumer electronics, office equipment, and communications devices. Before using the product in medical equipment or automobile equipment including car audio, keyless entry and engine control unit, contact to SII Semiconductor Corporation is indispensable.  Features • Operating voltage range Read: 1.6 V to 5.5 V Write: 1.7 V to 5.