Datasheet4U Logo Datasheet4U.com

S-5843A - TEMPERATURE SWITCH IC

General Description

No connection 2 VSS 3 RT 2 GND pin Test pin 4 VDD Power supply pin 5 DET Output pin

1.

The NC pin is electrically open.

The NC pin can be connected to VDD pin or VSS pin.

2.

Set the RT pin open in use.

Pin No.

1 Test pin Description 2 VSS 3 NC

Key Features

  • br>.
  • Detection temperature: TDET = +40°C to +120°C, +1°C step, detection accuracy: ±2.5°C.
  • Low voltage operation: VDD = 1.65 V min.
  • Low current consumption: IDD = 4.5 μA typ. (Ta = +25°C).
  • Hysteresis temperature: selectable in 2°C, 4°C, 10°C or 20°C.
  • Selectable output logic in active "H" or "L".
  • Selectable output form in CMOS or Nch open drain.
  • Prevent functions for false detection operation and false release operation.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
S-5843A Series www.sii-ic.com © Seiko Instruments Inc., 2009-2015 TEMPERATURE SWITCH IC (THERMOSTAT IC) Rev.2.2_00 The S-5843A Series is a temperature switch IC (thermostat IC) which detects the temperature with a temperature accuracy of ±2.5°C. The output inverts when temperature reaches the detection temperature. The S-5843A Series restores the output voltage when the temperature drops to the level of release temperature. The S-5843A Series operates at the lower power supply voltage of 1.65 V and its current consumption is 4.5 μA typ. due to CMOS configuration. A temperature sensor with the negative temperature coefficient, a reference voltage generation circuit, a comparator and a delay circuit are integrated on one chip, and enclosed into the packages SOT-23-5 and SNT-6A.