Datasheet4U Logo Datasheet4U.com

S-93C76A - 3-WIRE SERIAL E2PROM

General Description

1 CS Chip select input 2 SK Serial clock input 3 DI Serial data input 4 DO Serial data output 5 GND 6 TEST 1 Ground Test 7 NC No connection 8 VCC Power supply

1.

Connect to GND or VCC.

Key Features

  • Operating voltage range: Read 2.7 V to 5.5 V (Ta =.
  • 40°C to +105°C) Write 2.7 V to 5.5 V (Ta =.
  • 40°C to +105°C).
  • Operation frequency: 1.0 MHz (VCC = 4.5 V to 5.5 V, Ta =.
  • 40°C to +105°C).
  • Write time: 10.0 ms max.
  • Sequential read capable.
  • Write protect function during the low power supply voltage.
  • Endurance: 106 cycles/word.
  • 1 (Ta = +85°C) 5 × 105 cycles/word.
  • 1 (Ta = +105°C).
  • Data retenti.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
S-93C76C 3-WIRE SERIAL E2PROM Seiko
S-93C76C 3-WIRE SERIAL E2PROM ABLIC
S-93C76CxxH 3-WIRE SERIAL E2PROM ABLIC
S-93C46C 3-WIRE SERIAL E2PROM Seiko
S-93C46C 3-WIRE SERIAL E2PROM ABLIC

Other Datasheets by Seiko Instruments

Part Number Description
S-93C46A CMOS SERIAL E2PROM
S-93C46B (S-93Cx6B) CMOS SERIAL E2PROM
S-93C56A CMOS SERIAL E2PROM
S-93C56B (S-93Cx6B) CMOS SERIAL E2PROM
S-93C66A CMOS SERIAL E2PROM

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
S-93C76A H Series www.sii-ic.com © Seiko Instruments Inc., 2010-2015 FOR AUTOMOTIVE 105°C OPERATION 3-WIRE SERIAL E2PROM Rev.3.1_00 The S-93C76A H Series is a high temperature operation 3-wire serial E2PROM for automotive components. The S-93C76A H Series has the capacity of 8 K-bit, and the organizztion is 512-word × 16-bit respectively. It is capable of sequential read, at which time addresses are automatically incremented in 16-bit blocks. The communication method is by the Microwire bus.  Features • Operating voltage range: Read 2.7 V to 5.5 V (Ta = −40°C to +105°C) Write 2.7 V to 5.5 V (Ta = −40°C to +105°C) • Operation frequency: 1.0 MHz (VCC = 4.5 V to 5.5 V, Ta = −40°C to +105°C) • Write time: 10.0 ms max.