Datasheet4U Logo Datasheet4U.com

S8241ABPMC - S-8241

General Description

Voltage detection pin between VM and VSS (Overcurrent detection pin) Positive power input pin Negative power input pin FET gate connection pin for discharge control (CMOS output) FET gate connection pin for charge control (CMOS output) www.DataSheet4U.com 5 1 2 3 Figure 2

Key Features

  • s (1) Internal high-accuracy voltage detection circuit.
  • Overcharge detection voltage: 3.9 V to 4.4 V (5 mV-step) Accuracy of ± 25 mV(+25°C) and ± 30 mV(.
  • 5°C to +55°C).
  • Overcharge release voltage 3.8 V to 4.4 V.
  • 1 Accuracy of ±50 mV.
  • 1. Overcharge release voltage = Overcharge detection voltage - Overcharge hysteresis The overcharge hysteresis can be selected in the range 0.0, or 0.1 to 0.4 V in 50mV steps. (However, selection "Overcharge release voltage.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
S82433LX LOCAL BUS ACCELERATOR (LBX) Intel Corporation
S82433NX LOCAL BUS ACCELERATOR (LBX) Intel Corporation
S8200 Linear LED Driver IC KODENSHI
S8201 SILICON GATE ENHANCEMENT MODE RF POWER VDMOS TRANSISTOR Polyfet RF Devices
S8202 SILICON GATE ENHANCEMENT MODE RF POWER VDMOS TRANSISTOR Polyfet RF Devices

Other Datasheets by Seiko Instruments

Part Number Description
S8233A Battery Protection IC
S8233B Battery Protection IC
S8233C Battery Protection IC
S8253A BATTERY PROTECTION IC
S8253B BATTERY PROTECTION IC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Rev.4.1_01 BATTERY PROTECTION IC FOR 1- CELL PACK S-8241 Series The S-8241 Series is a series of lithium-ion/lithium polymer rechargeable battery protection ICs incorporating high-accuracy voltage detection circuits and delay circuits. These ICs are suitable for protection of single-cell lithium ion/lithium polymer battery packs from overcharge, overdischarge and overcurrent. www.DataSheet4U.com „ Features (1) Internal high-accuracy voltage detection circuit • Overcharge detection voltage: 3.9 V to 4.4 V (5 mV-step) Accuracy of ± 25 mV(+25°C) and ± 30 mV(−5°C to +55°C) • Overcharge release voltage 3.8 V to 4.4 V *1 Accuracy of ±50 mV *1. Overcharge release voltage = Overcharge detection voltage - Overcharge hysteresis The overcharge hysteresis can be selected in the range 0.0, or 0.